How to change the Spinshot Settings

Watch the video to see how to change the settings of your Spinshot ball machine.

Settings include:

  • Hours used - displays the hours the machine has been used
  • Drill Trial Mode - on or off (for programming custom drills)
  • Motor auto stop  - on or off  (battery saving feature)
  • Beeps  - on or off 
  • Horizontal and Vertical range - adjust the minimum and maximum widths and heights (for Random mode)
  • Empty hopper stop  - on or off (battery saving feature)
  • FW version (displays the current firmware version)
  1. Turn the machine on and wait for the initialisation to finish.
  2. Press Start
  3. Press Stop
  4. Press and hold button 1 to open the settings menu
  5. Press button 5 to go down the menu, and button 2 to go up the menu
  6. Press button 1 to select
  7. Press button 4 to exit the menu

 

Menu Buttons for Player or Pickle Machine 

Drill-1: Enter (Long press to enter menu)
Drill-2: Up (Move cursor up or increase value)
Drill-5: Down (Move cursor down or decrease value)
Drill-4: Exit (Go to up level menu or exit menu)

Menu Buttons for Plus2 or Plus machine

SPEED: Enter (Long press to enter menu)
FEED: Up (Move cursor up or increase value)
HEIGHT: Down (Move cursor down or decrease value)
SPIN: Exit (Go to up level menu or exit menu)